Description
Protector 3-IN-1 assists in removing existing scale from pool walls particularly ceramic aggregate finishes. It also creates superb clarity in the water by ensuring calcium remains in solution and will keep build up on salt chlorinators soft. Pools using bore or dam water should use Protector 3-IN-1 to ensure that metals remain in solution and don t stain the surface.
Description
request a quote
Product
Protector 3-in-1
Product Details
The Vitalyse Protector 3-in-1 prevents the build-up of calcium and magnesium build up on the pool surface which are commonly cause from high pH levels, high calcium or bore water. It is the perfect chemical to remove stubborn scale from pool walls as well as ensuring calcium remains within the solution keeping water crystal clear
Key Features and Benefits:
- Prevention of calcium and magnesium buildup on pool surface.
- Prevention of metals dropping out of solution and assists in the removal of metal stains.
- Assists with keeping calcium build up on the salt cell soft to ensure chlorine production is not inhibited.
- Protects your pool surface from staining
DIRECTIONS FOR USE:
Pre-dilute the required dose in 10L of water, then â ˜broadcast' across the pool surface. For more detailed information refer to the product data sheet.
GENERAL INFORMATION:
Regular additions to the swimming pool of Protector 3 in 1 will limit the THREE main problem areas where the formation of calcium and magnesium based scale plus metal staining occurs.
Salt Cell where calcium build up on the cell will decrease the production od chlorine gas.
Pool Surfaces and Equipment where combined â ˜water hardness' forms in time a hard scale which is unsightly on pool surfaces and can damage operation of pool equipment.
Surface Staining where oxidisation of minerals in the water source or introduction in the salt adde dto the pool can cause staining.
The Polmmer in Protector 3 in 1 meets the 1995 ANSI/NSF Standard 60: Drinking Water Treatment Chemicals Health Effects.
CAUTION:
NOT TO BE USED AS A FOOD CONTAINER
SAFETY DIRECTIONS:
The concentrate is harmful, if swallowed. Avoid contact with skin, eyes and clothing. DO NOT mix with other chemicals.
SPILLS:
Any spills should be absorbed with sand or soil and rEcovered into a drum. Wash the area thoroughly with water afterwards. A Material Safety Data Sheet is available for this product.
FIRST AID:
For advice, contact a Poisons Information Centre or a doctor (at once). If swallowed, DO NOT induce vomiting. Immediately give a glass of water. If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. If in eyes, hold eyelids apart and flush the eye continuously with running water. Continue flushing until advised to stop by the Poisons Information Centre of a doctor, or at least 15 minutes.
